Cymbopogon citratus Essential Oil Increases the Effect of Digluconate Chlorhexidine on Microcosm Biofilms.

The aim of this study was to evaluate the effect of the Cymbopogon citratus essential oil and its association with chlorhexidine on cariogenic microcosm biofilm composition and acidogenicity. Minimum inhibitory and bactericide concentrations from the essential oil and chlorhexidine were determined by broth microdilution assay. Microcosms (polymicrobial) biofilms were produced on glass coverslips, using inoculum from human saliva in McBain culture medium (0.5% sucrose exposure for 6 h/day) for 3 days in 24-well plates. The biofilms were treated twice a day and their composition was evaluated by microorganism quantification. The acidogenicity was evaluated by measuring the pH of the spent culture medium in contact with the biofilm. Overall, the association of C. citratus and chlorhexidine reduced total bacterial counts and aciduric bacteria (maximum reduction of 3.55 log UFC/mL) in microcosm biofilms. This group also presented the lowest acidogenicity even when exposed to sucrose-containing medium. C. citratus essential oil increases the effect of digluconate chlorhexidine on microcosm biofilms. Based on these findings, this study can contribute to the development of new formulations that might allow for the use of mouthwashes for a shorter period, which may reduce undesirable effects and increase patient compliance to the treatment.

A systematic review and meta-analysis of the effect of photodynamic therapy for the treatment of oral mucositis.

BACKGROUND: Oral mucositis is a significant reaction to antineoplastic treatment characterized with pain, nutritional compromise, impact on the quality of life, interruption in cancer therapy and risk for infection. There is no effective standard protocol for the treatment of oral mucositis. This study aims to synthesize the scientific evidence available about the effects of photodynamic therapy on treatment of oral mucositis. METHODS: PubMed, Scopus, Web of Science, Science Direct, Scielo, Embase and Cochrane libraries were searched. Two independent and calibrated researchers (kappa = 0.92) performed all systematic steps according to Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA). To access the risk of bias, RoB 2 and Delphi list criteria for clinical trials were used. Meta-analysis was conducted using the R software with "META" package. RESULTS: Clinical and randomized clinical trials were included with a total of five articles. Meta-analysis, level of evidence, and risk of bias assessment were performed showing that photodynamic therapy was effective in reducing healing time in association with low-power laser therapy when compared to low-power laser therapy alone (p = 0.0005). CONCLUSION: Photodynamic therapy presents promising results for the treatment of oral mucositis. It may be an effective therapeutic option, contributing to the healing of injured tissues especially in the time needed for repair.

Rabdomyosarcoma of the Mandible: An Uncommon Clinical Presentation.

Rhabdomyosarcoma (RMS) is the most common soft tissue sarcoma in children and adolescents. Most patients present with a mass in the head and neck region, urogenital region, or with distal extremity involvement. The authors describe a challenging case of a 6-year-old male patient presenting with mandibular RMS. The clinical/radiographic/tomographic evaluations classified the tumor as an advanced stage (stage IV), with a mass of 6.0 cm involving the left side of the mandible and parotid region. The biopsy revealed round, spindled, and pleomorphic cells with hyperchromatic nuclei and rare larger rhabdomyoblasts with eosinophilic cytoplasm. The diagnosis was of embryonal RMS. The patient was referred for treatment with cycles of chemotherapy; however, pulmonary and bone marrow metastasis were identified. Radiotherapy and local surgery with microvascular reconstruction were performed later; however, the patient died after a few months. Early diagnosis is critical for a good prognosis and cure of patients with RMS. Correct diagnosis considering also the histological subtype is important for adequate treatment, which according to the literature is not uniform probably because of the rarity of this neoplasm.

Reduced salivary flow rate and high levels of oxidative stress in whole saliva of children with Down syndrome.

AIM: To investigate salivary parameters between children with Down Syndrome (DS) and without DS. MATERIALS AND METHODS: Stimulated whole saliva was collected from 18 children with DS and 23 without DS. Salivary flow rate, pH, and salivary buffering capacity were determined. Cariogenic microorganisms were quantified by culture, and periodontopathogens by quantitative real-time polymerase chain reaction. The antioxidant profile was quantified spectrophotometrically, while malondialdehyde (MDA) was quantified by high-performance liquid chromatography. Data were analyzed by Mann-Whitney test and Spearman correlation (α = 0.05). RESULTS: Salivary flow rate was significantly lower in DS than in controls (p < 0.0001). Significant higher difference was observed for total protein dosage (p < 0.0001), superoxide dismutase activity (SOD) (p = 0.0002), and MDA (p < 0.001) in DS group. CONCLUSIONS: Reduced salivary flow rate might be an important factor in oral diseases development. High salivary levels of SOD and MDA show the significant influence of the oxidative stress and the early-onset periodontal disease in DS people.

Long-term influence of associating an antibacterial agent with GIC on bond strength to caries-affected dentin

Aim: To evaluate the bond strength of a GIC associated with chlorhexidine (CHX) to sound and caries-affected dentin, immediately and after six months of storage. Methods: Sixty molars were assigned to two groups of 30 teeth. One had flat dentin surfaces produced and submitted to caries induction to obtain a caries-affected dentin. In the other group dentin was maintained sound. Teeth of each group were randomly reassigned to three subgroups (n=10) according to the concentration of CHX added to the GIC (0%, 1% and 2% by weight). Two specimens (1mm diameter x 1 mm high) of the same material were constructed on each dentin surface. One was submitted to the microshear bond strength (µSBS) test after 24 hours and the other after 6 months of storage in water at 37oC. Failure modes were analyzed under a stereomicroscope. Bond strength data were analyzed by three-way ANOVA followed by Games-Howell tests for multiple comparisons, and failure modes by the Chi-square test (α = 0.05). Results: The µSBS values obtained to sound dentin were higher compared with those to caries-affected dentin (p≤0.001). In sound dentin, the group with 2% CHX showed lower µSBS values compared with 0% and 1% CHX after 24 hours (p=0.005 and p=0.032 respectively). In caries-affected dentin, after 24 hours, µSBS in group with 1% CHX was statistically higher than the values in groups with 2% CHX after 24 hours (p=0.001) and 1% CHX after 6 months (p=0.024). Irrespective of the condition of substrate, comparisons showed no statistically significant differences between the other groups (p≥0.053). Cohesive in material and mixed failures prevailed for all groups. Conclusions: The addition of CHX at concentrations of up to 2% to the GIC did not affect the bond strength of the material to sound and caries-affected dentin in a long-term evaluation (AU)

Bond strength of a composite resin to glass ionomer cements using different adhesive systems / Resistência de união de uma resina composta a cimentos de ionômeros de vidro utilizando diferentes sistemas adesivos

Introduction: Glass ionomer cements are often used as a base or cavity lining prior to restorative material. Objective: To evaluate the bond strength of a composite resin to different glass ionomer cements, when using a two-step conventional and self-etching adhesive systems. Material and method: Three glass ionomer cements (Ketac Molar Easymix, Vitremer and Vitrebond), the composite resin Filtek Z350 XT and the adhesive systems Adper Single Bond 2, Clearfil SE Bond and Adper Easy One were used. As negative control, resin was bonded to cement without using an adhesive system. Holes (4 mm diameter, 2 mm deep) prepared in acrilic bloks were filled with the glass ionomer cements (n=12/group). On the surface, an area of 1mm in diameter was delimited, the adhesive system was applied, and a specimen of composite resin with 1 mm height was made. After 24 hours storage (37 °C and 100% humidity), the microshear test was performed. Data were analyzed using two-way ANOVA and Tukey test for comparison between groups (α=0.05). Result: The adhesive systems significantly improved the bond strenght of composite resin to glass ionomer cements (p≤0.001). There was no significant difference in bond strength when self-etching adhesive systems were compared with the simplified etch-and-rinse adhesive, except for Vitrebond where Clearfil SE Bond determined higher bond strength when compared to Adper Single Bond 2 (p=0.003). Conclusion: Self-etching adhesive systems are a good option for establishing the bond between the composite resin and the glass ionomer cement.

Introdução: Os cimentos de ionômero de vidro são frequentemente usados como base ou forramento cavitário, previamente ao material restaurador. Objetivo: Avaliar a resistência de união da resina composta a diferentes cimentos de ionômero de vidro, utilizando sistemas adesivos convencional simplificado e auto-condicionantes. Material e método: Foram utilizados três cimentos (Ketac Molar Easymix, Vitremer e Vitrebond), a resina Filtek Z350 XT e os sistemas adesivos Adper Single Bond 2, Clearfil SE Bond e Adper Easy One. Como controle negativo, a resina foi aplicada sobre o cimento sem a utilização de sistema adesivo. Cavidades (4 mm de diâmetro e 2 mm de profundidade), confeccionadas em blocos acrílicos, foram preenchidas com os cimentos ionoméricos (n=12/grupo). Na superfície foi delimitada uma área de 1mm de diâmetro, aplicado o sistema adesivo e confeccionado um espécime de resina composta com 1 mm de altura. Após 24 horas de armazenamento (37 °C e 100% de umidade), foi realizado o ensaio de microcisalhamento. Os dados foram analisados usando ANOVA a dois fatores, e teste de Tukey para comparação entre grupos (α=0,05). Resultado: Os sistemas adesivos melhoraram significativamente a resistência de união resina/cimento de ionômero de vidro (p≤0,001). Não houve diferença significativa na resistência de união quando os sistemas adesivos auto-condicionantes foram comparados com o convencional simplificado, com exceção no Vitrebond onde o Clearfil SE Bond determinou maior resistência de união quando comparado com o Adper Single Bond 2 (p=0,003). Conclusão: Os sistemas adesivos auto-condicionantes constituem uma boa opção para estabelecer a união entre resina composta e cimento de ionômero de vidro.

Cryotherapy for localized juvenile spongiotic gingival hyperplasia: preliminary findings on two cases.

BACKGROUND: Localized juvenile spongiotic gingival hyperplasia (LJSGH) is a distinct subtype of inflammatory gingival hyperplasia that shows lack of response to traditional periodontal treatment, and after surgical excision, recurrence rate of 6-16% has been reported. CASE REPORT: Two girls (11- and 9-year-old) with multifocal red patches along the maxillary and mandibular labial gingiva showed no regression of the lesions after basic periodontal treatment. Surgical excision of focal lesion in each case was performed, which showed typical features of LJSGH. In both cases, the lesions presented recurrence. Hence, cryotherapy sessions in all lesions were performed. CONCLUSION: Cryotherapy appears to be successfully in LJSGH and well received by paediatric patients.

Biocompatibility of a restorative resin-modified glass ionomer cement applied in very deep cavities prepared in human teeth.

This study evaluated whether a restorative resin-modified glass ionomer cement, Vitremer (VM), would be biocompatible with pulp tissue when used as a liner in very deep cavities prepared in young human permanent teeth. Two dental cements in current use as liner materials, Vitrebond (VB) and Dycal (DY), were compared to VM. Class V cavities were prepared in 36 sound premolars that were scheduled for extraction, and the cavity floor was lined with the restorative cement (VM) or a liner/base control cement (VB or DY). For VM specimens, the cavity floor was pretreated with a primer (polyacrylic acid plus 2-hydroxyethyl methacrylate). Teeth were extracted after 7 or 30 days and processed for microscopic evaluation. In the VM group, inward diffusion of dental material components through dentinal tubules, associated with disruption of the odontoblastic layer, moderate to intense inflammatory response, and resorption of inner dentin, was observed in 2 teeth at 7 days. These histologic features were observed in 1 tooth at 30 days. In the VB group, mild inflammatory reactions and tissue disorganization observed at 7 days were resolved at 30 days. No pulpal damage occurred in the DY specimens. Of the materials tested, only Vitremer was not considered biocompatible, because it caused persistent pulpal damage when applied in very deep cavities (remaining dentin thickness less than 0.3 mm).

Effect of dietary sugars on dual-species biofilms of Streptococcus mutans and Streptococcus sobrinus – a pilot study / Efeito dos açucares da dieta em biofilme dupla espécie de Streptococcus mutans e Streptococcus sobrinus – um estudo piloto

Introduction: Frequent consumption of sugars and the presence of Streptococcus mutans and Streptococcus sobrinus are correlated with higher caries experience. Objective: The aim of this pilot study was to elucidate the effect of different fermentable carbohydrates on biomass formation and acidogenicity of S. mutans and S. sobrinus biofilms. Material and method: Single and dual-species biofilms of S. mutans ATCC 25175 and S. sobrinus ATCC 27607 were grown at the bottom of microtiter plates at equal concentrations for 24 h at 37 °C under micro-aerobic atmosphere. Carbohydrates were added at 2% concentration: maltose, sucrose, glucose and lactose. BHI Broth (0.2% glucose) was used as negative control. Acidogenicity was assessed by measuring the pH of spent culture medium after 24 h, immediately after refreshing the culture medium and for the next 1 h and 2 h. Crystal violet staining was used as an indicator of the total attached biofilm biomass after 24 h incubation. Data were analyzed by two-way ANOVA followed by Bonferroni post hoc test. Significance level was set at 5%. Result: All carbohydrates resulted in higher biomass formation in single- and dual-species biofilms when compared to the control group. Sucrose, lactose and maltose showed higher acidogenicity than the control group in both single- and dual-species biofilms after 24 h. Conclusion: These findings indicate that the type of biofilm (single- or dual-species) and the carbohydrate used may influence the amount of biomass formed and rate of pH reduction.

Introdução: O consumo frequente de açucares e a presença de Streptococcus mutans e Streptococcus sobrinus estão correlacionados com maior experiência de cárie. Objetivo: Elucidar o efeito de diferentes carboidratos fermentáveis na biomassa e acidogenicidade de biofilmes formados por S. mutans e S. sobrinus. Material e método: Biofilmes única e dupla- espécie de S. mutans ATCC 25175 e S. sobrinus ATCC 27607 em concentrações iguais cresceram no fundo de placas de microtitulação por 24 h a 37 °C em microaerofilia. Maltose, sacarose, glicose e lactose foram adicionados a 2%. BHI caldo (0.2% glicose) foi usado como controle negativo. Acidogenicidade foi avaliada por meio da medição do pH do meio de cultura após 24 h, imediatamente após troca de meio e nas próximas 1 h e 2 h. Coloração por cristal violeta foi usada como indicador do total de biomassa aderida, após 24 h de incubação. Os dados foram analisados por teste ANOVA two way e Teste de Bonferroni. O nível de significância foi de 5%. Resultado: Todos os carboidratos resultaram em maior formação de biomassa em ambos os tipos de biofilme (única ou dupla- espécie), quando comparado ao grupo controle. Sacarose, lactose e maltose mostraram maior acidogenicidade que o grupo controle após 24 h nos biofilmes única ou dupla-espécie, apenas após 24 h. Conclusão: Os achados indicam que o tipo de biofilme (única ou dupla- espécie) e o tipo de carboidrato usado podem influenciar tanto na quantidade de biomassa formada quanto na taxa de redução do pH.

Perfil do atendimento odontológico no Serviço de Urgência para crianças e adolescentes da Faculdade de Odontologia de Araraquara (FOAr) - UNESP / Treatment profile at dental urgent care clinic for children and teenagers from Faculdade de Odontologia de Araraquara (FOAr) - UNESP

Introdução: Atendimentos de urgência são uma prática comum em Odontopediatria, porém pouco se sabe sobre o perfil desses atendimentos. Objetivo: Avaliar o perfil dos atendimentos de urgência de crianças de 0 a 13 anos de idade realizados na Clínica Infantil da FOAr, no período de 1997 a 2012, a fim de se quantificarem os pacientes e os procedimentos realizados no Serviço, além de identificar os tratamentos mais realizados. Material e método: Neste estudo transversal observacional, os relatórios desse Serviço, fornecidos pelo Sistema Integrado de Clínicas, foram analisados quanto ao número de pacientes, aos atendimentos e ao tipo de procedimentos realizados. Os procedimentos foram classificados em sete categorias: Diagnóstico, Preventivos, Anestesia, Endodônticos, Restauradores, Cirúrgicos e Outros. Esses dados foram tabulados e submetidos a uma análise descritiva. Resultado: De 1997 a 2012, foi atendido um total de 13.849 pacientes e foram realizados 25.786 atendimentos e 86.279 procedimentos. Houve diminuição do número de pacientes atendidos a partir de 2001, mas o número de consultas e de procedimentos não diminuiu na mesma proporção. Observou-se que, durante o período de 2007 a 2012, os procedimentos de diagnóstico foram os mais realizados, seguidos pelos preventivos. Dentre os procedimentos operatórios, o mais realizado foi o restaurador, seguido dos endodônticos. Procedimentos cirúrgicos estão entre os menos realizados. Conclusão: Conclui-se que houve uma mudança no perfil dos atendimentos dentro desse Serviço. Apesar de haver uma redução no número de pacientes atendidos, o número de consultas e a quantidade de procedimentos realizados permaneceram estáveis. Os procedimentos realizados estão de acordo com o perfil do Serviço de Urgência.

Introduction: Urgency care is a common practice in pediatric dentistry but little is known about the profile of these visits. Objective: To evaluate the profile of patients aged between 0 and 13 years assisted at the Urgency Unit offered by FOAr, from 1997 to 2012, in order to quantify patients and procedures performed and identify the most frequently treatments performed. Material and method: In this observational transversal study, the reports of urgency service provided by the Integrated Clinical System were analyzed for the number of patients, treatments and type of procedures performed. The procedures were classified into seven categories: Diagnosis, Preventive, Anesthesia, Endodontic, Restorative, Surgical and Others. The data were organized and analyzed descriptively. Results: From 1997 to 2012, a total of 13,849 patients were treated in 25,786 visits and 86,279 procedures were conducted. A decrease in the number of patients assisted was observed. However, the number of appointments and the number of procedures did not decrease at the same ratio. Diagnosis procedures were the most frequent procedure performed, followed by preventive procedures. Restorative and endodontic treatments were the most frequent operative procedure performed. Dental surgeries were done less frequently. Conclusion: A profile change in the dental urgent treatment was observed throughout the years. Despite a reduction in the number of patients assisted, the number of visits and the amount of procedures performed remained stable. The procedures performed are in agreement with the profile of a dental urgent care clinic.

Caracterização dos pacientes e procedimentos executados no serviço de atendimento a pacientes com necessidades especiais da Faculdade de Odontologia de Araraquara - UNESP / Characterization of patients and procedures performed in the service to patients with special needs of Araraquara School of Dentistry - UNESP

Objetivo: Caracterizar os pacientes atendidos e os procedimentos realizados no Serviço de Atendimento a Pacientes com Necessidades Especiais da Faculdade de Odontologia de Araraquara (FOAr) - UNESP. Metodologia: A partir dos prontuários odontológicos dos pacientes atendidos em nível ambulatorial entre 2007 e 2013, foram obtidas informações em relação a idade no início do tratamento, tipo de deficiência, medicamentos usados, número de sessões de atendimento e número e tipo de procedimentos odontológicos realizados. Resultado: Dos 232 prontuários analisados, observou-se que mais da metade dos pacientes (56,0%) apresentava deficiência mental, paralisia cerebral ou anomalias congênitas determinadas por agentes infecciosos, com deficiência mental associada. Entre as anomalias congênitas, a mais prevalente foi a Síndrome de Down (9,9%). Apenas 20% dos pacientes iniciaram o tratamento antes dos dez anos de idade e 62,0% faziam uso de anticonvulsivantes, antipsicóticos, ansiolíticos, antiepilépticos e antidepressivos. Foram realizados 4.506 procedimentos odontológicos, sendo 37,6% preventivos e 62,4% curativos (Restauradores, 28,0%; Periodontais, 13,9%; Endodônticos, 9,7%; Cirúrgicos, 9,1%; Protéticos, 1,7%). Observou-se também que, para a maior parte dos pacientes (63%), foram necessárias até dez sessões para a realização do tratamento. Conclusão: Os pacientes que procuraram tratamento odontológico no Serviço de Atendimento a Pacientes com Necessidades Especiais da FOAr apresentavam, na sua maioria, deficiências com envolvimento neurológico. Apesar de esse serviço priorizar os procedimentos preventivos, a maior parte dos procedimentos executados foi curativa, o que está diretamente relacionado com a procura tardia pelo tratamento odontológico.

Objective: To characterize the patients and dental procedures performed in Service to Patients with Special Needs of Araraquara School of Dentistry (FOAr) - UNESP. Methodology: From the dental records of patients treated at outpatient basis between 2007 and 2013, information regarding age at the beginning of treatment, type of disability, controlled medications used, number of dental sessions, and number and type of dental procedures performed was obtained. Result: Of the 232 records analyzed, more than half of the patients (56.0%) had mental retardation, cerebral palsy or congenital abnormalities caused by infectious agents associated with mental retardation. Among the congenital abnormalities, the most prevalent was the Down syndrome (9.9%). Only 20% of patients started treatment before the age of ten and 62.0% used anticonvulsants, antipsychotics, anxiolytics, antidepressants and antiepileptics. A total of 4,506 dental procedures were performed, 37.6% were preventive procedures and 62.4% curative procedures (restorative, 28.0%; periodontal, 13.9%; endodontic, 9.7%; surgical, 9.1%, and prosthetic 1.7%). Also was observed that for most patients (63%) up to 10 sessions were required for the completion of treatment. Conclusion: Most patients with special needs who sought dental treatment at FOAr presented neurological involvement. Despite this service prioritize preventive procedures; most of the procedures carried out were curative, fact directly linked to late search for the dental treatment.

Oral rehabilitation in a patient with special needs / Tratamento reabilitador em paciente especiaL

Cerebral palsy is a disorder caused by central nervous system injuries that can occur during the prenatal, perinatal, or postnatal periods. It is characterized by multiple abnormalities, including impairment of speech, body and motor coordination, balance, intelligence, mastication, and swallowing. Due to abnormal movements of the facial muscles, compounded by impairment of the self-cleansing mechanism of the oral cavity, patients with this condition can develop oral diseases such as caries, periodontal disease, and tooth loss. The aim of this paper is to report a case of a patient with cerebral palsy who presented with absence of the maxillary central incisors, removable prosthesis wear, and oral candidiasis. Impressions of the upper and lower arches and periapical radiographs were obtained. The lateral incisors were found to exhibit root resorption, which contraindicated their use as abutment teeth for fixed prosthodontics. In view of the patient's socioeconomic status and cerebral palsy-related limitations, a resin-bonded fixed partial denture was fabricated and nystatin solution was used for treatment of oral candidiasis. The patient had an esthetically and functionally adequate outcome.

A paralisia cerebral é uma anormalidade causada por lesões no sistema nervoso central que podem ocorrer durante o período pré, peri ou pós-natal. É caracterizada por alterações múltiplas como o comprometimento da fala, da coordenação motora e corporal, do equilíbrio, do intelecto e da mastigação e deglutição. Devido aos movimentos anormais da musculatura facial, juntamente com o comprometimento da função de autolimpeza, o paciente pode apresentar quadros de patologia bucal como a cárie, a doença periodontal e a perda dental. O objetivo deste trabalho foi relatar o caso clínico de um paciente portador de paralisia cerebral com ausência dos incisivos centrais superiores, portador de prótese removível e com um quadro de candidose bucal. Foi realizada a moldagem dos arcos superior e inferior e as radiografias periapicais. Pôde-se observar que os incisivos laterais apresentavam reabsorção radicular, o que contra indicava a sua utilização como pilares para prótese fixa. Devido às condições sócio-econômicas e limitações relacionadas a paralisia cerebral, foi confeccionada uma prótese adesiva e, para a candidose bucal foi instituído o tratamento com solução de Nistatina. O resultado do tratamento foi estética e funcionalmente adequado para o paciente.

Effect of finishing and polishing on color stability of a nanofilled resin immersed in different media / Efeito do acabamento e polimento na estabilidade de cor de uma resina composta nanoparticulada imersa em diferentes meios

Objective: The purpose of this study was to evaluate the effect of finishing and polishing on color stability of a nanofilled composite resin (Filtek Z350 XT) according to different immersion media. Material and Method: Composite disks (10 mm diameter, 2 mm thickness) were prepared for each group (n = 6) using a stainless steel mold. The groups were divided according to the presence or absence of finishing and polishing procedure and immersion media (artificial saliva, artificial juice- KAPO(r) Coca-Cola(r) flavors: pineapple, orange, strawberry and grape). The finishing and polishing procedures were performed using Super -Snap(r) disks. The specimens were stored in artificial saliva for 24 hours (baseline) and were analyzed using a color spectrophotometer by CIELab system. Then, they were immersed in different media for 5 minutes, 3 times a day, every 4 hours during 60 days. They were stored in artificial saliva at 37 ± 1°C during the immersion intervals. After this time, new measure of color was performed. The data were analyzed using Kruskall-Wallis test and Mann- Whitney test. The significance level was 5%. Result: The results showed that the finishing/polishing not significantly influence the color stability of resin composite (p >0.05). There was no statistically significant difference in the color stability of the studied resin after immersion in different media (p > 0.05). Conclusion: The finishing and polishing procedures and the immersion media did not have influence on color stability of nanofilled resin Filtek Z350 XT. .

Objetivo: O objetivo deste estudo foi avaliar o efeito do acabamento e polimento na estabilidade de cor da resina nanoparticulada Filtek Z350 XT em função de diferentes meios de imersão. Material e Método: Espécimes circulares (10 mm de diâmetro e 2 mm de espessura) foram preparados para cada grupo (n=6) utilizando uma matriz de aço inoxidável. Os grupos experimentais foram divididos de acordo com a presença ou ausência de acabamento e polimento e diferentes meios de imersão (saliva artificial, Suco artificial pronto KAPO(r) da Coca Cola(r) sabores: abacaxi, laranja, morango e uva). Os procedimentos de acabamento e polimento foram realizados com discos de lixa Super-Snap(r). Os espécimes permaneceram em saliva artificial por 24 horas (baseline) e foram submetidos à análise da cor usando um espectrofotômetro pelo sistema CIELab. Em seguida, foram imersos nos diferentes meios por 5 minutos, 3 vezes ao dia, com intervalos de 4 horas, durante 60 dias. Os espécimes foram mantidos em saliva artificial a 37±1°C nos intervalos entre as imersões. Após este período foi realizada nova leitura de cor. Os dados foram analisados com os testes de Kruskall-Wallis e Mann-Whitney. O nível de significância foi de 5%. Resultado: Os resultados mostraram que o acabamento/polimento não influenciou significativamente a estabilidade de cor da resina composta (p>0,05). Não houve diferença estatisticamente significativa na estabilidade de cor da resina estudada após a imersão nos diferentes meios (p>0,05). Conclusão: O acabamento e polimento e os meios de imersão não apresentaram influência na estabilidade de cor da resina nanoparticulada Filtek Z350 XT. .

Roughness and morphology of composites: influence of type of material, fluoride solution, and time.

This study evaluated the effect of fluoride solutions on surface roughness and morphology of composites in the short and long term. Specimens were randomly assigned to experimental groups (n=5) according to type of composite (nanofilled, microhybrid, microfilled) and immersion media (artificial saliva, 0.05% sodium fluoride solution, Fluordent Reach, Oral-B, and Fluorgard). Roughness was evaluated at time intervals: T 0 after 24 h in artificial saliva (baseline); T 60 after being in assigned immersion media for 1 min daily over 60 days; and T final after artificial aging (20,000 thermal cycles, 1,200,000 mechanical loading cycles, and continuous immersion for 1,825 min). Surface morphology was qualitatively analyzed by scanning electron microscopy (SEM) at T 60 and T final. Roughness data were submitted to analysis of variance for mixed repeated measures, Sidak, and Tukey tests at α=0.05. Micro-filled resin showed the highest roughness values. Fluoride solutions had no influence on roughness. Higher roughness values were observed after artificial aging. In SEM observations after the artificial aging, the specimens showed surface degradation, irrespective of immersion medium or type of composite. Nano-filled resin showed higher loss of resin matrix and protrusion of filler particles. Roughness was not influenced by fluoride solutions; however, it is material dependent and increases over time.

Effect of chlorhexidine gluconate on porosity and compressive strength of a glass ionomer cement / Efeito da adição de gluconato de clorexidina na porosidade e resistência à compressão de um cimento de ionômero de vidro

Introduction: For presenting wide antibacterial activity, chlorhexidine (CHX) has been extensively used in dentistry and can be easily incorporated into the glass ionomer cement (GIC) and consequently released into the oral cavity. Aim: The aim of this study was porosity and compression strength of a GIC, that was added to different concentrations of CHX. Material and Method: Specimens were prepared with GIC (Ketac Molar Esaymix) and divided into 4 groups according to the concentration of CHX: control, 0.5% and 1% and 2% (n = 10). For analysis of pores specimens were fractured with the aid of hammer and chisel surgical, so that the fracture was performed in the center of the specimens, dividing it in half and images were obtained from a scanning electron microscope (SEM) analyzed in Image J software. The compressive strength test was conducted in a mechanical testing machine (EMIC - Equipment and Testing Systems Ltd., Joseph of the Pines, PR, Brazil). Statistical analysis was performed by ANOVA, Tukey test. Significance level of 5%. Result: No statistically significant changes between the study groups was observed both for the number of pores as well as for the compressive strength. Conclusion: The use of GIC associated with CHX gluconate 1% and 2% is the best option to be used in dental practice. .

Introdução: Por apresentar ampla atividade antibacteriana, a clorexidina (CHX) tem sido amplamente utilizada em odontologia, podendo ser facilmente incorporada ao cimento de ionômero de vidro (CIV) e liberada consequentemente na cavidade bucal. Objetivo: O objetivo neste estudo foi avaliar a porosidade e resistência à compressão de um CIV, ao qual foi adicionado diferentes concentrações de CHX. Material e Método: Os espécimes foram preparados com CIV (Ketac Molar Esaymix) e divididos em 4 grupos de acordo com a concentração de CHX: controle, 0,5% e 1% e 2% (n=10). Para análise dos poros os espécimes foram fraturados com auxílio de martelo e cinzel cirúrgicos, de modo que a fratura era realizada no centro do corpo de prova, dividindo-o ao meio e as imagens obtidas no microscópio eletrônico de varredura (MEV) analisadas no software Image J. O teste de resistência à compressão foi realizado na máquina de ensaios mecânicos (EMIC - Equipamentos e Sistemas de Ensaios Ltda, São José dos Pinhais, PR, Brazil). A análise estatística foi realizada por ANOVA, complementada pelo teste de Tukey. Nível de significância adotado de 5%. Resultado: Não se observou alteração estatisticamente significante entre os grupos estudados tanto para o número de poros quanto para a resistência à compressão. Conclusão: O uso de CIV associado ao gluconato de CLX a 1% e 2% é a melhor opção para ser utilizada na clínica odontológica. .

Addition of chlorhexidine gluconate to a glass ionomer cement: a study on mechanical, physical and antibacterial properties.

The objective of this work was to determine the effect of different concentrations of chlorhexidine digluconate (CHX) on setting time, surface hardness, maximum tensile bond strength and antibacterial activity of a glass ionomer cement (GIC). The material used as control was Ketac Molar Easymix GIC. CHX was incorporated into the GIC during its manipulation at concentrations of 0.5, 1.0 and 2.0%. Antimicrobial activity against S. mutans and L. acidophilus was evaluated by means of agar diffusion test. Tensile bond strength data were analyzed statistically using Analysis of variance and Tukey's test. Setting time, Vickers hardness and agar diffusion test were analyzed using Kruskal-Wallis and Mann-Whitney tests at a significance level of 5%. It was observed that adding CHX at concentrations of 1% and 2% increased significantly the setting time of the material (p=0.012 and p=0.003, respectively). There was no significant difference between control and 0.5% CHX groups regarding the setting time. Addition of 2% CHX decreased significantly the surface hardness in relation to the control group (p=0.009), followed by the 1% CHX group (p=0.009). The tensile bond strength of the material also decreased significantly after adding CHX at a concentration of 2% (p=0.001). Addition of CHX promoted formation of an inhibition halo in both bacterial strains for all concentrations. The results showed that the best option for clinical use of GIC with CHX is at 0.5% concentration, since antibacterial activity increased and the physical-mechanical properties remained unchanged.

In Vivo study of an intracanal dressing of calcium hydroxide/chlorhexidine in necrotic primary teeth

AIM: To evaluate the clinical and radiographic success of endodontic treatment in human primary teeth with necrotic pulp with and without radiographically visible furcal/periapical lesion treated with a calcium hydroxide (CH) and chlorhexidine (CHX) intracanal dressing. The tested hypothesis was that there is no difference in the clinical and radiographic success in primary teeth medicated with CH pastes prepared with polyethylene glycol (PEG) or CHX. METHODS: Thirty-two teeth with necrotic pulp were used in this randomized clinical study: 12 without and 20 with lesion. Canals were prepared and medicated with CH pastes with polyethylene glycol (CH/PEG) (n=16) or 2% CHX gel (CH/CHX) (n=16). Definitive filling was done after 30 days. The teeth were clinically and radiographically examined during 12 months to determine the success of the endodontic therapy. Data from clinical and radiographic examination of the initial condition and 12 months after treatment were compared using the Z test (α = 0.05). RESULTS: There was no significant difference (p>0.05) in the success rate of teeth with and without lesion medicated with CH/PEG or CH/CHX. No significant difference (p>0.05) was found between the pastes regardless of the presence of lesion. CONCLUSIONS: Combination of CHX and CH was not more effective than the CH/PEG paste, as similar clinical and radiographic success rate was observed in teeth medicated with either type of intracanal dressing.

Influence of the addition of chlorhexidine diacetate on bond strength of a high-viscosity glass ionomer cement to sound and artificial caries-affected dentin / Influência da adição do diacetato de clorexidina na resistência de união de um cimento de ionômero de vidro de alta viscosidade à dentina sadia e afetada por cárie artificial

Introduction: The aim of adding chlorhexidine (CHX) to glass ionomer cements (GIC) is to improve their antibacterial property, but it may interfere with their bond to dentin. Objective: To evaluate the influence of adding chlorhexidine diacetate at different concentrations to a high-viscosity GIC on its bond to sound and artificial caries-affected dentin. Material and Method: Eighty human third molars were used, on which an area of dentin was exposed on the occlusal surface. Half of the specimens were kept sound and the other half were subjected to artificially induced caries. CHX was mixed with GIC powder at 0.5%, 1% and 2% (w/w). GIC without CHX was used as control. On each dentin surface a specimen measuring 1 mm in diameter and 1 mm high was made. The samples were kept at 37 °C and 100% humidity for 24 hours and subject to microshear testing. The results were analyzed using Kruskal-Wallis and Mann Whitney tests (α=0.05). Result: There was no significant difference between bond strength of sound and caries-affected dentin (p>0.05). For both substrate conditions, groups GIC, GIC+0.5% CHX and GIC+1% CHX showed statistically similar bond strength (p>0.05), and higher than that of GIC+2% CHX (p≤0.025). Cohesive and mixed failures were predominant in all groups. Conclusion: The addition of 0.5% and 1% chlorhexidine did not result in negative changes in the bond strength of GIC to caries-affected and sound dentin. .

Introdução: A adição da clorexidina (CLX) ao cimento de ionômero de vidro (CIV) visa melhorar a sua propriedade antibacteriana, podendo contudo interferir na adesão à dentina. Objetivo: Avaliar a influência da adição de diacetato de CLX em diferentes concentrações a um CIV de alta viscosidade, na sua adesão à dentina sadia e afetada por cárie artificial. Material e Método: Foram utilizados 80 terceiros molares, que tiveram a superfície de dentina exposta na face oclusal. Metade dos dentes foram mantidos hígidos e a outra metade foi submetida à indução artificial de cárie. A CLX foi misturada ao pó do CIV nas concentrações de 0,5%, 1% e 2%. O CIV sem CLX foi usado como controle. Em cada superfície dentinária foi confeccionado um espécime com 1 mm de diâmetro e 1 mm de altura. Estes foram mantidos a 37 °C com 100% de umidade por 24 horas, e, submetidos ao teste de microcisalhamento. Os resultados foram analisados pelos testes de Kruskal-Wallis e Mann Whitney (α=0.05). Resultado: Não houve diferença estatística entre os valores de resistência de união para dentina hígida e afetada (p>0,05). Para as duas condições do substrato, os grupos CIV, CIV+CLX 0,5% e CIV+CLX 1% apresentaram resistência de união estatisticamente semelhante (p>0,05), e superior ao CIV+CLX 2% (p≤0.025). Houve predominância de fraturas mistas e coesivas do material para todos os grupos. Conclusão: A adição de CLX nas concentrações de 0,5% e 1% não influenciou negativamente na resistência de união de um CIV de alta viscosidade à dentina sadia e afetada por cárie. .

Addition of Chlorhexidine Gluconate to a Glass Ionomer Cement: A Study on Mechanical, Physical and Antibacterial Properties

The objective of this work was to determine the effect of different concentrations of chlorhexidine digluconate (CHX) on setting time, surface hardness, maximum tensile bond strength and antibacterial activity of a glass ionomer cement (GIC). The material used as control was Ketac Molar Easymix GIC. CHX was incorporated into the GIC during its manipulation at concentrations of 0.5, 1.0 and 2.0%. Antimicrobial activity against S. mutans and L. acidophilus was evaluated by means of agar diffusion test. Tensile bond strength data were analyzed statistically using Analysis of variance and Tukey's test. Setting time, Vickers hardness and agar diffusion test were analyzed using Kruskal-Wallis and Mann-Whitney tests at a significance level of 5%. It was observed that adding CHX at concentrations of 1% and 2% increased significantly the setting time of the material (p=0.012 and p=0.003, respectively). There was no significant difference between control and 0.5% CHX groups regarding the setting time. Addition of 2% CHX decreased significantly the surface hardness in relation to the control group (p=0.009), followed by the 1% CHX group (p=0.009). The tensile bond strength of the material also decreased significantly after adding CHX at a concentration of 2% (p=0.001). Addition of CHX promoted formation of an inhibition halo in both bacterial strains for all concentrations. The results showed that the best option for clinical use of GIC with CHX is at 0.5% concentration, since antibacterial activity increased and the physical-mechanical properties remained unchanged.

O objetivo deste trabalho foi determinar o efeito de diferentes concentrações de gluconato de clorexidina (CLX) sobre o tempo de presa, dureza superficial, resistência máxima a tração e atividade antibacteriana de um cimento de ionômero de vidro (CIV). O material utilizado como controle foi o CIV Ketac Molar Easymix. O gluconato de CHX foi incorporado no CIV durante a sua manipulação, em concentrações de 0,5, 1,0 e 2,0%. Atividade antimicrobiana contra S. mutans e L. acidophilus foi avaliada por meio de teste de difusão em ágar. Análise de variância (ANOVA) e teste de Tukey foram usadas para avaliar a resistência a tração do material. Para avaliar tempo de presa, dureza Vickers e teste de difusão em ágar foram usados os testes de Mann-Whitney e Kruskal-Wallis ao nível de significância de 5%. Observou-se que a adição de CHX, em concentrações de 1% e 2%, aumentou significativamente o tempo de presa do material (p = 0,012 e p = 0,003, respectivamente). Não houve diferença significativa entre os grupos controle e CHX 0,5% em relação ao tempo de presa. A adição de 2% de CHX diminuiu significativamente a dureza superficial, em relação ao grupo controle (p = 0,009), seguido pelo grupo 1% de CHX (p = 0,009). A resistência à tração do material também diminuiu significativamente após a adição de CHX a uma concentração de 2% (p = 0,001). A adição de CHX promoveu formação de halo de inibição em ambas as linhagens bacterianas para todas as concentrações. Os resultados mostraram que a melhor opção para o uso clínico de CIV com CHX está numa concentração de 0,5%, uma vez que a atividade antibacteriana aumentada e as propriedades físico-mecânicas permaneceram inalteradas.